New Electronic Products Information

As it is known that LED strip lights usually have the current and voltage requirements that are different compared to the main power supply of 240V AC, they require a separate unit that is called an LED Driver so that they can work. China LED Drivers wholesale are very much common to help the users with this problem. However, the main thing to look out is to decide that what LED driver is suitable for the strip lights. An LED driver also known as transformer at times is a self-powered power supply that matches with the voltage and current requirements of the device it is serving. The led driver manufacturers takes the main power supply and then converts it so that the device works properly.

What LED driver do you need?

The drivers come in various sizes and shapes and not all are suited for your purposes. When selecting a driver, you shall take into account the things like power outlet and the size of the strip lights. There are usually two primary varieties of China LED drivers and those are mains ready and plug and play.

Plug and play LED drivers are made for easy and quick installation and they do not need much expertise to use. The driver connects itself to the main supply by a typical UK 3-pin plug and to the strip lights by the corresponding female and male connectors.

The mains ready drivers are made for more advanced type of installations can be wired directly in the main household power supply typically by domestic household switch for a complete lighting experience. An IP67 rating even makes these perfect to be used in damp conditions and in the rain as well.

 

Apart from the type, you will even have to select a perfect sized China led drivers wholesale. The driver size is measured in watts and should match to power consumption required by the LED strip lights. If you want to calculate the power consumptions of your strip lights, then you can multiply the wattage on the meter by the number of meters you are intending to run off. For example if you are intending to use around 10 meters of the strip light that takes into 8 watts every meter, the complete load will be 10 x 8 = 80 watts. It is even possible to run more than one strip light on one single LED driver.